SBU-CV SBUSHERMCV352 Styled Boat Cover Hull Fishing 7OZ 156 166

( Brand: Sbu-cv ), ( Manufacturer Part Number: SBUSHERMCV352 ), ( Part Type: Cover ), ( Warranty: 7 Year )

Review SBU CV 7oz Styled Fit Boat Cover V hull Narrow Fishing 156 166 fits 1972

The SBusher McV352 7oz Styled Boat Cover is a high-quality, custom-fit solution for protecting your V-hull fishing boat. Measuring 156 inches in length and 166 inches in width with a beam of 72 inches, this cover is specifically designed to fit boats within these dimensions.

Made from a durable 7oz marine-grade vinyl material, this cover provides superior protection against the elements. The material is UV-resistant, ensuring that your boat remains protected from harmful sun rays, and it is also waterproof, keeping your boat dry even during heavy rain or snow.

The cover features a tailored fit with reinforced seams for added strength and durability. It also includes a double-stitched zippered opening for easy access to your boat, as well as adjustable straps and buckles for a secure fit. The cover is designed to fully enclose your boat, protecting not only the hull but also the deck, console, and seating areas.

The SBusher McV352 7oz Styled Boat Cover is easy to install and remove, thanks to its heavy-duty, webbed-reinforced straps and buckles. These straps can be adjusted to fit a variety of boat types and sizes, ensuring a snug fit no matter what. The cover also comes with a storage bag for easy transportation and storage when not in use.

In summary, the SBusher McV352 7oz Styled Boat Cover is a reliable and durable solution for protecting your V-hull fishing boat. Its custom fit, reinforced seams, and waterproof material provide superior protection against the elements, while its adjustable straps and zippered opening make it easy to use. With its weatherproof design and easy installation, this cover is an excellent investment for any boat owner looking to keep their boat in top condition.

1. Durable: The cover is made of 7oz marine-grade vinyl that is UV-resistant and waterproof, ensuring protection against sun, rain, and snow.

2. Fits Perfectly: The cover is designed to fit boats with a V-hull, measuring from 156 to 166 inches in length and 72 inches in width. Its adjustable straps and buckles allow for a snug fit, preventing wind and water from entering the boat.

3. Protects the Boat: The cover protects the boat's upholstery, paint, and other components from fading, cracking, and other forms of damage.

4. Easy to Install and Remove: The cover features a zippered front and rear, making it easy to install and remove. It can be folded up for storage when not in use.

1. Price: The cover is relatively expensive compared to other boat covers on the market.

2. May Not Fit Exact Models: While the cover is designed to fit boats with a V-hull, it may not fit exact models or years of boats due to variations in size and design. It's important to double-check the specifications of your boat before purchasing.

The Sbushermcv352 7oz Styled Boat Cover V-Hull Fishing 156-166 72 SBU-CV is a high-quality, durable cover that offers excellent protection for your boat. Its adjustable straps and buckles allow for a snug fit, preventing water and wind from entering the boat. However, its price may be a deterrent for some buyers. If you have the budget and need a reliable cover for your V-hull boat, this cover is a great option. If price is a concern, you may want to consider other, less expensive options.

Details:

Tie down loops sewn into its hem one every 2-3.

To do this: measure your boats beam widest point, usually mid-ship. This item is an aftermarket, styled to fit cover. In the event you are not 100% satisfied with our merchandise, please. Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way secure cover.

For boats over in length some extra straps might be needed. This means all condensation will evaporate and it prevent mold mildew issues.

Bay fisherman or a v-hull shaped boat, plus the dimensions: beam width and length of. The cover is not completely custom to specific boat, but a highly fitted designed accommodate primary characteristics of boat style. Large diameter 1/4 shock cord sewn in hem on the bottom will hold cover place.

It need to evaporate prevent mold and mildew problems. This unique finish provides exceptional water repellent while maintaining breath ability for the health of boat.

For storage on a trailer or trailing, loops sewn to the sides of cover can be utilized with straps. You don't list my boat. Features:Teri-purpose boat cover: storage, mooring and towing trailer use colors: this item is available in 11 colors to choose from: s2-black, s14-blue, s7-red, s1-charcoal grey, s3-teal, s22-khaki, s15-hunter green, s8-cranberry, s29-yellow, s11-grey, s31-navy material: 7oz 100 solution dyed polyester made from technologically advanced, durable, 7 oz, non scratch, polyester. Our covers have shock cords sewn into the hem for a snug fit and loops cover tie-down straps.

Please specify year, make and exact model of your boat. Package includes: 1 brand new, styled to fit boat cover.

Shock cord is like elastic, only much, much stronger sewn-in tie down loops sewn every throughout hem to be used with straps during trailing included double-stitched durable 4-ply seams, double folded hems weather-resistant anti-wick thread construction for superior strength. This is especially important if you live in a humid areas.

You can also find hull id number on a top right corner of your boat stern. The original snap on cover that to boat are only available from manufacturer and usually not after design is out of production.

If my boat cover doesn't fit, can I return it. Warranty: 7 years pro-rated manufacturers warranty.

It is recommended that you don't cover the swim step of your boat when mooring, unless have an integrated platform on. Styled-to-fit covers are made-to-order to fit hull boat shape and configuration listed in items title with no optional, aftermarket, add on equipment unless stated our listing.

None of the aftermarket boat covers have snaps.

Please pad these areas before installing your cover. Does the cover have openings for support poles.

Feel free to through messages with any question. Even the most expensive material on market, Cinderella, is not waterproof. Are your covers waterproof. All of our boat highly water resistant, but not 100 waterproof. All styled fit covers are made order.

Cinderella material may be available for this cover, please availability.

Aftermarket product. Are the covers designed for mooring, trailing and storage purposes how they attaching to boat. Our can be used storage, or. Simply make sure to use a boat cover support pole or similar device raise the up create an angle for water escape and will not seep through roll off sides. Note: do not measure up and over the windshield, this is a straight line measurement.

The straps will go down and wrap around trailer legs. It will not be exactly the same as original cover.

Designed for extra durability and all-weather protection. Add the length of any installed accessories that should be covered by boat cover such as pulpits, jack plates, extended swim platforms to center line.

Measure your boats center line length straight measurement from bow to stern the length , stand inside boat and run a measuring tape tip front back through of. It will efficiently shield your boat from all finish-destroying agents: sun, snow, dust, dirt, mold, mildew and other corrupting elements. Does the boat cover have snaps.

The cover has to be breathable let moisture evaporate in order prevent mold and mildew problems.

Care: extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bow mounted trolling motors. I am not sure about the model of my boat.

Made to order in USA, styled fit boat cover from extremely durable, 7oz solution dyed polyester. Boat cover support pole not included is recommended for use with all covers.

Tie downs are included with every boat cover. Covers have shock cord in the hem to tie down your cover. Tie downs are mandatory for use with our travel covers.

Styled to fit covers do not have reinforcements. Motor covers are attached to most outboard model's.

part #: sbushermcv352 price

• $140.39

specifications boatcoveracc:

• for years: 1972
• brand: Sbu-cv
• mpn: Sbushermcv352
• part type: Cover
• warranty: 7 Year

General boatcoveracc:

• in stock: Yes
• condition: New
• Accessories Gear > Covers

Seller boatcoveracc:

• rating 01-25-19: 100.0%
• city: Landrum, South Carolina
• # feedbacks 01-25-19: 9122
• zipcode: 29356

Returns boatcoveracc:

• policy: no returns

Shipping boatcoveracc:

• type: Flat
• handling: 10 days
• cost: $20.0

Offer boatcoveracc:

• quantity: 55
• Sold: 0
• bids: 0
• Started: January 24, 2019, 8:41 pm
• best offer: false

Payments boatcoveracc:

• PayPal

Sbu-cv SBUSHERMCV352 Is Similar To:

• Bt2m Sbu Bayliner Nylon Boat (28.2% similar) Byline nylon boat cover BT2M new in carrying bag water-proof, sun-proof size: fit the length ft, beam 100 color: blue includes rope to tie down your boat brand bag, but not original package...(May 21st, 2017)
• Cvcc-sbu1221 Cv-sbu 2009 Nitro Z8 (26.7% similar) 50CONSOLE type single console cover attachment rope ratchet trolling motor yes...(August 16th, 2017)
• Cvcc-sbu1963 Cv-sbu Black Centurion Enzo (16.5% similar) A great addition to your sport boat.: black centurion Enos SUV 240 with gladiator tower mooring boat cover photo of on is not this exact kit. This is a black mooring cover for centurion Enos SUV 240 with the gladiator tower. It comes with a storage bag and the accessories necessary for installing ...(May 26th, 2017)
• Sbuu20957 Sbu 7oz Boat Bimini Top Chris Craft 187 Concept I O 1993 0758417047834 (24.8% similar) Feel free to for the Bimini top sizing if needed. These tops are freestanding, providing more air circulation, and can be mounted in several locations on the boat. This job is best accomplished with two people. Don't let too much sun cut your boating day short. Solution dyed polyester fabric ...(August 10th, 2016)
• Sbuu40131 Sbu Semi-custom Boat Cover Carolina Skiff 24 Dlx 2015-2016 0758417453048 (37.4% similar) If there is no answer please leave a message or call back. Boat covers featuring double stitching gore ternary sewing thread the seams will outlast the material it is sewn into, will not stain, will not mold, will not mildew, will not discolor from sun exposure. Always measure your boat to be ...(March 27th, 2016)
• Sbuu68034 Sbu Round Tube 2 Bow Boat Bimini Top 47 53 W X 42 H 56 L Solution Dyed Polyester 0787917185319 (24.8% similar) Weather resistant anti wick thread used throughout canvas construction. Mounting hardware for inflatable boats sold separately. Do not exceed 35 mph with the Bimini top deployed. Tubing 7/8 heavy wall anodized aluminum tubing or 7/8 stainless steel tubing. Best warranty in the business based on ...(April 11th, 2016)
• Sbuu40129 Sbu Semi-custom Fit Boat Cover For Carolina Skiff 21 Dlx 2015-2016 0787917187498 (44.9% similar) Extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bow mounted trolling motors. Please pad these areas before installing your cover. If there is no answer please leave a message or call back. Resistant better ...(March 28th, 2016)
• Sbuu91702 Sbu 7oz Boat Bimini Top Polar Kraft Fb 1648 Aw 2007 0787917434431 (25.8% similar) Construction double walled main bow for added strength. 7 year warranty. Our tops come to you partially assembled to greatly simplify the complexity of setup and reduce the time required to erect on your boat. If you prefer to mount it on the windshield, please for windshield mounting information at...(August 9th, 2016)
• Sbubcb3635 Sbu Blue Boat Cover For V-hull Runabout 17-19 Length Beam Up To 96 (41.8% similar) Mold and mildew protection the material is treated to minimize mold and mildew. Features boat cover condition brand new color please see color choices above. It will efficiently shield your boat from all finish destroying agents sun, snow, dust, dirt, mold, mildew and other irruptive elements. Fit ...(October 21st, 2016)
• Sbubcb36351 Sbu Blue Great Quality Boat Cover For V-hull Runabouts 16-17 Length 90 Beam (43.1% similar) Features features a heavy duty, integrated trailing system, full elastic hem on the bottom. Mold and mildew protection the material is treated to minimize mold and mildew. Package includes 1 brand new, trailer able boat cover. Easy to use remove the cover and your boat is as good as new and ready ...(October 18th, 2016)
• Sbubcb363532 Sbu Boat Cover Fits 16 186 Fish Ski Pro-style Bass V-hull Beam Up To 94 (41.1% similar) Convenient storage bag trailing straps colors the default color in this listing is blue. Integrated buckle and strap system for easy fitting and straps snap into quick release buckles on the cover to secure the cover while trailing. Non abrasive will not scratch storage bag included for convenient ...(October 22nd, 2016)