SBU-CV SBUSHERMCV159 Styled Boat Cover Hull Poling Platform 7OZ 166 176

( Brand: Sbu-cv ), ( Manufacturer Part Number: SBUSHERMCV159 ), ( Part Type: Cover ), ( Warranty: 7 Year )

Review SBU CV 7oz Styled Fit Boat Cover V hull 166 176 Poling Platform fits 1985

The SBusher McV159 7oz Styled Boat Cover is a high-quality, custom-fit cover designed specifically for V-hull boats with measurements ranging from 166 to 176 inches in length and an 85-inch poling platform. This cover is made with a heavy-duty 7oz marine-grade vinyl material that provides superior protection against the elements.

The SBusher cover features a stylish and sleek design, with a fitted, snug fit that ensures maximum coverage without sacrificing style. The cover is designed to fit over the bow, side, and stern of the boat, as well as the poling platform, providing complete protection from the sun, rain, and wind.

The material used in this cover is UV-resistant and waterproof, ensuring that it will not fade, crack, or tear over time. It is also breathable, allowing moisture to escape and preventing the buildup of mold and mildew. The cover is also resistant to saltwater, making it ideal for use in coastal areas.

The SBusher cover is easy to install and remove, with a convenient zippered opening that allows for easy access to the boat. It also features reinforced stress points, such as the bow, stern, and along the sides, to ensure maximum durability and longevity.

Overall, the SBusher McV159 7oz Styled Boat Cover is a great choice for anyone looking for a high-quality, custom-fit cover that provides superior protection for their V-hull boat. Its heavy-duty material, stylish design, and easy installation make it a great investment for boat owners looking to protect their investment.

1. Durability: The cover is made from 7oz Marine-Grade Vinyl, which is highly resistant to UV rays, water, and mildew. This ensures that your boat stays protected for a long time.

2. Fit and Adjustability: The cover is designed to fit boats with a V-hull between 166 and 176 inches in length and an 85-inch poling platform. It also features adjustable straps and buckles, allowing you to customize the fit to your boat's specific dimensions.

3. Design: The cover features a stylish and sleek design, which not only looks great but also helps to protect your boat from the elements.

4. Protection: The cover provides full protection for your boat, including the bow, deck, and gunwales. It also includes a separate cover for the poling platform, ensuring that every inch of your boat is protected.

1. Price: The cover is more expensive than some other boat covers on the market. However, its high-quality materials and customizable fit make it a worthwhile investment for many boat owners.

2. Installation: Installing the cover can be a bit tricky, especially if you're not used to working with boat covers. However, the manufacturer provides clear instructions and customer support to help you through the process.

Conclusion: The Sbushermcv159 7oz Styled Boat Cover for V-Hull 166-176 boats with an 85 poling platform (SBU-CV) is a high-quality, customizable cover that provides excellent protection for your boat. While it may be more expensive than some other covers, its durability and adjustability make it a worthwhile investment for boat owners who want to keep their boat in top shape.

Recommendation: If you're looking for a high-quality boat cover that offers excellent protection and a customizable fit, the Sbushermcv159 7oz Styled Boat Cover for V-Hull 166-176 boats with an 85 poling platform (SBU-CV) is a great option to consider. Its 7oz Marine-Grade Vinyl material is highly resistant to UV rays, water, and mildew, and its adjustable straps and buckles allow you to customize the fit to your boat's specific dimensions. While the installation process may be a bit tricky, the manufacturer provides clear instructions and customer support to help you through it. Ultimately, the Sbushermcv159 7oz Styled Boat Cover is a great investment for any boat owner who wants to keep their boat in top shape.

Details:

Boat cover support pole not included is recommended for use with all covers.

Covers have shock cord in the hem to tie down your cover. Warranty: 7 years pro-rated manufacturers warranty.

This is especially important if you live in a humid areas. Styled-to-fit covers are made-to-order to fit hull boat shape and configuration listed in items title with no optional, aftermarket, add on equipment unless stated our listing.

To do this: Large diameter 1/4 shock cord sewn in hem on the bottom will hold cover place. Our covers have shock cords sewn into the hem for a snug fit and loops cover tie-down straps. Features:Teri-purpose boat cover: storage, mooring and towing trailer use colors: this item is available in 11 colors to choose from: s2-black, s14-blue, s7-red, s1-charcoal grey, s3-teal, s22-khaki, s15-hunter green, s8-cranberry, s29-yellow, s11-grey, s31-navy material: 7oz 100 solution dyed polyester made from technologically advanced, durable, 7 oz, non scratch, polyester.

The cover has to be breathable let moisture evaporate in order prevent mold and mildew problems. Styled to fit covers do not have reinforcements.

Please specify year, make and exact model of your boat. If my boat cover doesn't fit, can I return it. Designed for extra durability and all-weather protection.

Shock cord is like elastic, only much, much stronger sewn-in tie down loops sewn every throughout hem to be used with straps during trailing included double-stitched durable 4-ply seams, double folded hems weather-resistant anti-wick thread construction for superior strength. Made to order in USA, styled fit boat cover from extremely durable, 7oz solution dyed polyester.

Are the covers designed for mooring, trailing and storage purposes how they attaching to boat. Our can be used storage, or. I am not sure about the model of my boat. Care: extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bow mounted trolling motors.

This means all condensation will evaporate and it prevent mold mildew issues. Aftermarket product.

Bay fisherman or a v-hull shaped boat, plus the dimensions: beam width and length of. Even the most expensive material on market, Cinderella, is not waterproof. You don't list my boat.

Even if you do not plan to travel with your boat cover, the tie downs can provide a convenient way secure cover.

It is recommended that you don't cover the swim step of your boat when mooring, unless have an integrated platform on. Please pad these areas before installing your cover. In the event you are not 100% satisfied with our merchandise, please.

The cover is not completely custom to specific boat, but a highly fitted designed accommodate primary characteristics of boat style. You can also find hull id number on a top right corner of your boat stern.

All styled fit covers are made order. Tie down loops sewn into its hem one every 2-3'.

Measure your boats beam widest point, usually mid-ship. None of the aftermarket boat covers have snaps.

The original snap on cover that to boat are only available from manufacturer and usually not after design is out of production. Does the cover have openings for support poles.

For boats over in length some extra straps might be needed. Add the length of any installed accessories that should be covered by boat cover such as pulpits, jack plates, extended swim platforms to center line.

Tie downs are mandatory for use with our travel covers. This item is an aftermarket, styled to fit cover. It need to evaporate prevent mold and mildew problems.

Are your covers waterproof. All of our boat highly water resistant, but not 100 waterproof. Simply make sure to use a boat cover support pole or similar device raise the up create an angle for water escape and will not seep through roll off sides.

The straps will go down and wrap around trailer legs. Motor covers are attached to most outboard model's waterproof trap moisture caused by condensation. This unique finish provides exceptional water repellent while maintaining breath ability for the health of boat.

It will not be exactly the same as original cover.

For storage on a trailer or trailing, loops sewn to the sides of cover can be utilized with straps. Tie downs are included with every boat cover. Measure your boats center line length straight measurement from bow to stern the length , stand inside boat and run a measuring tape tip front back through of.

Package includes: 1 brand new, styled to fit boat cover. Does the boat cover have snaps.

It will efficiently shield your boat from all finish-destroying agents: sun, snow, dust, dirt, mold, mildew and other corrupting elements. Feel free to through messages with any question.

part #: sbushermcv159 prices

• $140.39-$156.59

specifications boatcoveracc:

• for years: 1985
• brand: Sbu-cv
• mpn: Sbushermcv159
• part type: Cover
• warranty: 7 Year

Shipping boatcoveracc:

• cost: $20.0
• type: Flat
• handling: 10 days

Payments boatcoveracc:

• PayPal

General boatcoveracc:

• in stock: Yes
• Accessories Gear > Covers
• condition: New

Seller boatcoveracc:

• zipcode: 29356
• city: Landrum, South Carolina
• # feedbacks 11-07-18: 9062
• rating 11-07-18: 100.0%

Offer boatcoveracc:

• quantity: 55
• Sold: 0
• best offer: false
• bids: 0
• Started: November 6, 2018, 7:25 pm

Returns boatcoveracc:

• policy: no returns

Ratings:

1. A a fast shipping, great communication 11-05-18
2. This is a nice cover well made I was impressed 11-06-18
3. received okay 11-05-18
4. Fast shipping, great seller! A transaction 11-05-18
5. Excellent Merchandise - Quick Shipping 11-04-18

Sbu-cv SBUSHERMCV159 Is Similar To:

• Bt2m Sbu Bayliner Nylon Boat (30.8% similar) Byline nylon boat cover BT2M new in carrying bag water-proof, sun-proof size: fit the length ft, beam 100 color: blue includes rope to tie down your boat brand bag, but not original package...(May 21st, 2017)
• Cvcc-sbu1221 Cv-sbu 2009 Nitro Z8 (24.1% similar) 50CONSOLE type single console cover attachment rope ratchet trolling motor yes...(August 16th, 2017)
• Cvcc-sbu1963 Cv-sbu Black Centurion Enzo (26.7% similar) A great addition to your sport boat.: black centurion Enos SUV 240 with gladiator tower mooring boat cover photo of on is not this exact kit. This is a black mooring cover for centurion Enos SUV 240 with the gladiator tower. It comes with a storage bag and the accessories necessary for installing ...(May 26th, 2017)
• Sbuu20957 Sbu 7oz Boat Bimini Top Chris Craft 187 Concept I O 1993 0758417047834 (27.7% similar) Feel free to for the Bimini top sizing if needed. These tops are freestanding, providing more air circulation, and can be mounted in several locations on the boat. This job is best accomplished with two people. Don't let too much sun cut your boating day short. Solution dyed polyester fabric ...(August 10th, 2016)
• Sbuu40131 Sbu Semi-custom Boat Cover Carolina Skiff 24 Dlx 2015-2016 0758417453048 (36.4% similar) If there is no answer please leave a message or call back. Boat covers featuring double stitching gore ternary sewing thread the seams will outlast the material it is sewn into, will not stain, will not mold, will not mildew, will not discolor from sun exposure. Always measure your boat to be ...(March 27th, 2016)
• Sbuu68034 Sbu Round Tube 2 Bow Boat Bimini Top 47 53 W X 42 H 56 L Solution Dyed Polyester 0787917185319 (24.7% similar) Weather resistant anti wick thread used throughout canvas construction. Mounting hardware for inflatable boats sold separately. Do not exceed 35 mph with the Bimini top deployed. Tubing 7/8 heavy wall anodized aluminum tubing or 7/8 stainless steel tubing. Best warranty in the business based on ...(April 11th, 2016)
• Sbuu40129 Sbu Semi-custom Fit Boat Cover For Carolina Skiff 21 Dlx 2015-2016 0787917187498 (38.6% similar) Extra care should be taken to protect your cover from coming into contact with sharp edges such as windshields, accessory brackets, or bow mounted trolling motors. Please pad these areas before installing your cover. If there is no answer please leave a message or call back. Resistant better ...(March 28th, 2016)
• Sbuu91702 Sbu 7oz Boat Bimini Top Polar Kraft Fb 1648 Aw 2007 0787917434431 (32% similar) Construction double walled main bow for added strength. 7 year warranty. Our tops come to you partially assembled to greatly simplify the complexity of setup and reduce the time required to erect on your boat. If you prefer to mount it on the windshield, please for windshield mounting information at...(August 9th, 2016)
• Sbubcb3635 Sbu Blue Boat Cover For V-hull Runabout 17-19 Length Beam Up To 96 (36.2% similar) Mold and mildew protection the material is treated to minimize mold and mildew. Features boat cover condition brand new color please see color choices above. It will efficiently shield your boat from all finish destroying agents sun, snow, dust, dirt, mold, mildew and other irruptive elements. Fit ...(October 21st, 2016)
• Sbubcb36351 Sbu Blue Great Quality Boat Cover For V-hull Runabouts 16-17 Length 90 Beam (38% similar) Features features a heavy duty, integrated trailing system, full elastic hem on the bottom. Mold and mildew protection the material is treated to minimize mold and mildew. Package includes 1 brand new, trailer able boat cover. Easy to use remove the cover and your boat is as good as new and ready ...(October 18th, 2016)
• Sbubcb363532 Sbu Boat Cover Fits 16 186 Fish Ski Pro-style Bass V-hull Beam Up To 94 (34.3% similar) Convenient storage bag trailing straps colors the default color in this listing is blue. Integrated buckle and strap system for easy fitting and straps snap into quick release buckles on the cover to secure the cover while trailing. Non abrasive will not scratch storage bag included for convenient ...(October 22nd, 2016)